Pellet Stove Furnace
Pellet stoves are available as freestanding units or fireplace inserts that can give your home the appearance of an old-fashioned wood-burning fireplace. They are available in freestanding units as well as fireplace inserts that give your home the look of an old-fashioned wood-burning fireplace.
The auger moves the pellets out of the hopper into the combustion chamber in the combustion chamber, where they are burned and generate heat. Sensors detect the flame and adjust the speed of operation in order to maintain a desired temperature in the room.
1. Energy Efficiency
Pellet stoves burn a sustainable, non-toxic fuel made of compressed sawdust and wood chips. They also contain bark, and other materials normally put in landfills, but can be turned into a sustainable and clean source of heating. They aid homeowners in reducing their energy use and thus greenhouse gas emissions. Many pellet stove users report that they can recoup their initial investment in just a few short years through a reduction in their heating bills.
Pellets are extremely compressed and more dense than natural wood, which makes them more efficient to burn. They also produce much less creosote buildup than traditional fireplaces made of wood. They are also stored in plastic bags to seal out moisture and need less frequent cleaning.
Pellet stoves, like other heating systems, need to be sized and vented properly. A qualified technician can assess your space and venting requirements to ensure the most efficient results.
In the process of installation, a hearth is built in accordance with your specifications. Then, the vent is inserted through a hole pre-cut in the exterior of your home. The vent can be run through a roof or sidewall depending on your preference and local laws.
After the vent and hearth are finished the pellet stove can be connected. Certain manufacturers provide a remote control that makes starting and maintaining the fire simple, while others have additional sensors that monitor combustion, airflow flue temperature, pressure. When the system detects it requires more or less pellets, it tells the auger to accelerate or slow down in line with the need.
Every stove has an hopper for storage that can hold between 35 and 130 pounds of pellets until they're needed. Hopper capacities affect how often the stove needs to be filled and larger hoppers allow for longer intervals between refills. A grille draws air from the room, then passes it over the heat exchanger, and then blows heated air in the living space through convection. A grate or auger spreads the pellets, and an under-sink pan is used to collect any burned ones as well as the ashes of combustion.
Although pellet stoves are more efficient than wood-burning stoves, they're not as efficient as natural gas furnaces or electricity-powered heaters. Electric components that drive motorized parts of the stoves require an electrical supply. This could pose an issue in the event of power failure, although backup systems such as batteries and generators are available.
2. Low Maintenance
Pellet stoves are extremely efficient, but they need some care to function properly. Regularly cleaning your stove's exhaust vents and the stove will help prevent the accumulation of harmful creosote, which can cause an explosion, fire or damage to your stove or house.
pellet stoves used for sale compressed natural particles (such as nutshells, kernels of corn or tiny pieces of scrapwood) made from wood or other substances. An auger powered by electricity will feed the fuel pellets from a container into the burner and into the combustion chamber. The thermostat you choose controls the speed at which pellets are delivered to the burner. This lets the fire keep roaring or lower or even shut down depending on your set temperature. When the fire is out the ash is thrown into an empty ash tray underneath the burner. It can then be easily removed and disposed.
Pellets are created from the waste products from lumber processing which could otherwise be thrown away. They are renewable and release significantly less particles into the air than traditional wood-burning stoves, resulting in a very clean burning heat source. The amount of carbon monoxide, carcinogens, and other harmful chemicals released from pellet stoves is less than the latest EPA certified wood stoves.
These stoves aren't required to be vented through a chimney, as is the case with traditional wood stoves. Instead, they can be vented properly through a wall or other structure outside. Pellet stoves have flue ports that are located on the top or rear of the appliance. They are connected to a ventpipe which extends out the house.
One drawback of a pellet stove is that you have to purchase or store enough pellets to last through the winter season. Pellet stove owners typically consume three tons of wood pellets every winter, at a cost of $200 per ton. The costs can add up, but they are less expensive than buying firewood and hauling it for a wood-burning stove or fireplace. Make sure you buy enough pellets to ensure your stove can function through the coldest winter months, and you have a suitable space to store the pellets (preferably dry, cool and away from the ground).
3. Reduced Carbon Footprint
Pellet stoves generate heat using renewable biomass fuel, which reduces reliance on finite fossils fuels. This reduces carbon footprints and increases the diversity of energy sources for homes.
Even the most modern woodstoves that are EPA certified emit significantly less carbon dioxide than pellet stoves. The emissions of pellet stoves are also considerably lower than those from gas furnaces. Pellets can be made of sawdust and bark as well as other lumber remnants. They could also include soybeans, corn, or agricultural waste. When burned, they emit less particulates (leading to respiratory problems and allergies) carcinogens and carbon monoxide as well as nitrogen oxides.
The major difference between the wood stove and the pellet stove is the feed system. Pellet stoves have hoppers that contain the pellets. When the thermostat or sensors suggest that the room is in need of heating, the furnace turns and the pellets are pumped into the combustion chamber, where they burn and produce heat. The air that is released from the combustion chamber is pushed through a heat exchanger that transfers the heat to a blower and out into the room. This results in extremely low emissions and no creosote accumulation.
When the hopper is empty, a cyclone process removes the ash and places it in an ash pot. The stove is fitted with a fan that circulates the heated, clean air into the room. The majority of pellet stoves are designed to run with minimal maintenance and come with a large view window that allows you and your family members to take in the flames.
The most significant factor affecting emissions from pellet stoves is the quality of the pellets. Poor-quality pellets produce more emissions. When selecting your pellets, ensure that they're certified to meet certain standards and do not contain other ingredients, such as petroleum products or urea. Look for a company with a warranty and will replace or repair parts in the event of a problem. Some states offer homeowners a tax credit when they choose to go even greener. This is a great way to help offset the initial cost of this kind of stove and makes installation more affordable.
4. Reduced Noise
Pellet stoves emit very little smoke and emissions when compared to wood burning fireplaces. They also utilize an electric fan to distribute the heat more evenly throughout the space. This is one of the reasons pellet stoves require much less maintenance than traditional wood stoves. While wood stoves need to be cleaned regularly of chemicals and particulates, pellet stoves only need a specialized metal vacuum cleaner for routine cleaning.
Many manufacturers have designed their stoves so that they are simple to install and operate, as well as maintain. They are available in different styles to complement the interior decor of your home. Certain models come with WIFI, a remote control, and programmable thermostat.
The majority of pellet stoves come with an enormous fuel hopper, which can hold between 35 and 130 pounds of pellets. The pellets are then fed into the combustion chamber via an auger. The speed at which pellets are delivered to the burner determines how hot the flame is and also the amount of heat produced. The hopper can be filled with hardwood pellets (from dense wood species like oak and hickory) or softwood pellets (from pine and fir). Many stoves can burn biomass pellets made from corn and switchgrass. This is a green alternative.
Pellet stoves produce less smoke and require less maintenance since they use cleaner fuel than wood-burning fireplaces. They do not need a chimney and are therefore the best choice for retrofits or new construction.
Pellet stoves do not require regular cleaning of creosote or other chemical like wood stoves. They only need periodic inspections to ensure the proper operation and maintenance. This could involve regular cleaning and inspection of the ash or "clinker" as well as the motors and fans, depending on the model. The dealer of your appliance can explain the proper procedures for your specific brand and model. They can also provide details regarding storage and safety, and assist you in finding the appropriate fuel for your stove.